基于阿秒抖动光纤锁模激光器的时钟同步

光纤锁模激光器结构简单, 运转稳定, 且输出的超短脉冲序列具有极高的时钟稳定性, 在抽运探测、脉冲相干合成等要求高精度时钟同步的前沿领域有着广阔的应用前景. 本文通过激光器腔内的电光调制器进行反馈控制, 实现了两台光纤锁模激光器之间的紧密时钟信号同步; 并且通过平衡光学互相关方法, 对残余的时钟误差信号进行了测量, 分辨率达到了13 as. 通过优化激光器的腔内动力学过程及反馈环路的参数, 在[1 Hz, 10 MHz]的积分区间内得到了109 as的残余时钟误差, 对应单台激光器的平均时间抖动为77 as.     

Investigation on interlaminar delamination tendency of multidirectional carbon fiber composites

In this investigation carbon fiber reinforced laminates with different orientation layups are prepared and studied under tensile loading condition. Multiple strain measurement techniques, namely, resistive strain gauges, embedded optical sensors and digital image correlation are used to analyze stress-strain behavior simultaneously through the thickness of composite materials, and to determine the sequence of failure in different plies. Inconsistencies of strains measured through different methods is correlated with the tendency for interlaminar delamination, therefore demonstrating the ability of multi-instrument approach to describe damage progress through the thickness of multidirectional laminates. Complementary analysis through acoustic emission methods reveals that the angle of off-axis surface plies can influence the sequence of failure under tensile loading condition, and damage monitoring capabilities of acoustic emission system is directly affected by delamination tendency of surface plies. Remarkably, the delayed failure of off-axis plies is shown to be related to reorientation of these layer towards loading direction using infrared thermography method.     

Determination of thermal expansion coefficient of a monofilament polyamide fiber using digital image correlation

Coiled polymer actuators are a type of artificial muscles that are a promising development in the field of smart materials. The coefficient of thermal expansion of monofilament polyamide fibers is a crucial parameter for understanding the actuation of coiled fibers. The main purpose of this work is to develop a new methodology for estimating the coefficient of thermal expansion and the transition temperature of monofilament polymer fibers. In the experimental procedure, axial deformations of monofilament polyamide fiber samples were induced by temperature variations using a controlled thermal system. These deformations were determined from images of polyamide samples using the digital image correlation method. Two different approaches based on distinct temperature conditions were conducted. An alternative model with three parameters, including the coefficient of thermal expansion, was introduced to describe the thermal-mechanical behavior of monofilament polyamide fibers. Moreover, polyamide samples were also characterized using four conventional methodologies. Results indicated that the coefficient of thermal expansion changed of a modest negative value to a large negative value and this transition occurred around the glass transition temperature of the polyamide. The thermal expansion curves demonstrate good repeatability and all estimated parameters were in accordance with literature, indicating that the proposed approach can be suitable for the proposed study. This investigation may help in understanding of the intrinsic thermal-mechanical behavior of polymeric monofilaments employed as actuators.     

Dynamic fracture testing of polymethyl-methacrylate (PMMA) single-edge notched beam

Dynamic fracture in single-edge notched polymethyl-methacrylate (PMMA) beams have been investigated by three-point-bending impact testing with a drop-weight machine. A high-speed camera combined with the digital image correlation (DIC) method is used to capture the impact-induced crack initiation and propagation, as well as the beam deformation fields and the open mode strain at the original notch tip. The crack propagation length is recorded and the instantaneous crack velocity is calculated. Furthermore, the dynamic fracture toughness K_Id is quantified from the loading-displacement relations at different impact velocities. The effects of the impact velocity and impact energy on dynamic fracture toughness, fracture initiation strain, as well as the corresponding influences on the fracture propagation velocity, are discussed.     

Product Inhibited Enzymatic Reactions on the Rotating Disk Electrodes

A model of cyclic staircase voltammetry of enzymatic reactions on the rotating disk electrode is developed and the inhibition by the product is investigated. The responses are mostly time – dependent current – potential curves with maxima in the forward but not in the backward branch. If the maxima appear in both branches, the inhibition is potential – dependent either directly or indirectly. The source of the second maximum is explained.     

Flexible sheet with radiophotoluminescence glass beads for remotely monitoring high beta-surface-contamination

A flexible sheet was made with radiophotoluminescence (RPL) glass beads on an experimental basis for visualization of high beta-surface-contamination. A simple RPL observation system for remote contamination monitoring was constructed with a homemade UV floodlight and a commercially available digital camera with supplementary optical lenses and filters. In preliminary experiments, RPL images were well observed with the digital camera of the present system. Their precise RPL intensity was determined after the correction of nonlinear response of the camera. It was expected from experiments that RPL images of beta-surface-contamination could be quantitatively evaluated through calibration, i.e., the conversion of camera images to dose data on the sheet-type glass dosimeter.     

Transition to Amplitude Death in Coupled System with Small Number of Nonlinear Oscillators

In this work, we investigate the amplitude death in coupled system with small number of nonlinear oscillators. We show how the transitions to the partial and the complete amplitude deathes happen. We also show that the partial amplitude death can be found in globally coupled oscillators either.     

Evaluation of the piezoelectric behaviour produced by a thick-film transducer using digital speckle pattern interferometry

This paper presents an interferometric measurement of the out-of-plane deflections produced by a piezoelectric transducer, manufactured by thick-film deposition of a ceramic paste over an alumina substrate, when is subjected to a DC electric voltage. It is shown that a digital speckle pattern interferometer with an incorporated phase-shifting facility allows the measurement of nanometer displacements generated by the piezoelectric device. These measurements are used to evaluate the effective piezoelectric charge constant along the polarization direction (d₃₃)_eff that characterizes the thick-film transducer.     

Synchronization of different chaotic systems via active radial basis functions sliding mode controller

This paper presents a new method to synchronize different chaotic systems with disturbances via an active radial basis function （RBF） sliding controller. This method incorporates the advantages of active control, neural network and sliding mode control. The main part of the controller is given based on the output of the RBF neural networks and the weights of these single layer networks are tuned on-line based on the sliding mode reaching law. Only several radial basis functions are required for this controller which takes the sliding mode variable as the only input. The proposed controller can make the synchronization error converge to zero quickly and can overcome external disturbances. Analysis of the stability for the controller is carried out based on the Lyapunov stability theorem. Finally, five examples are given to illustrate the robustness and effectiveness of the proposed synchronization control strategy.